140 inches Fixed Curved Projector Screen 16:9 3D Matte White Material 1.2 High Gain
 
Curved Fixed Frame Projection Screens are widely considered the best value in the home theater market today. Made of the finest materials and engineered to the highest standards of quality, these screens project an image of luxury and are a fine addition to any home theater or business.
Features
 
Screen Material
 

• Award Winning 1.2 Gain front projection material with black backing and full tension uniformity across entire viewing surface
• 140-inch Diagonal, 16:9 Aspect Ratio. View Size: 68.6" H x 122" W.
• Outstanding picture quality at any viewing angle with no compromise in resolution or brightness
• Active 3D and 4K Ultra HD Ready
• Elegant velvet covered frame absorbs projector overshoot and increases picture contrast
• Assembles in minutes and includes installation hardware.
• 2 Year Manufacturer's Warranty

 
Design and Installation
 

• 3.15" / 80mm width frame and is velvet coated
• Split-frame design facilitates lower shipping costs without sacrificing quality
• Easy to assemble and install in minutes
• Wall brackets allow screen to slide horizontally for properly centered installation

• Specification:
   

  Operation:	DIY Curved Fixed Frame
  Viewing Area (H x W):	1743x3100mm / 68.6x122inch
  Diagonal:	140" (Diagonal)
  Aspect Ratio:	16:9
  Gain:	1.2
  Screen Fabric:	High Definition Matte White
  Constructions:	Allumunium Alloy
  Frame Size:	80mm /3.15 inch (Curved)
  Control method:	Wall Mount
  Frame Color:	Black Velvet
  Warranty:	24 months

 
 

What is the different between Matt White and Glass Bead?
Matt White--Matt white vinyl reflective surface diffuses projected light in all directions, so image can be seen from any angle. MW provides accurate colour rendition as well as superior clarity. Recommended for use with all high light output projection devices. Better in a low ambient light environment. Gain = 1.1. Also the MW surface can be cleaned.
Glass Bead--Spherical glass beads embedded in surface provide more reflection giving a brighter image compared to matt white. This brighter image is limited to a smaller viewing angle than matt white. Glass Bead screens will slightly alter the purity of the colours displayed... and will have 'sweet spots' where the picture is at its premium... the picture at other viewing angles can appear slightly darker (yet still lighter than a MW screen). Gain = 2.5. But the GB surface can NOT be cleaned.
Some suggestions of choosing the screen size...
The optimization size would give you the best enjoying when watching films, so please read the follow suggestions before you bid the item.
1. Please measure the horizontal distance between the audience seats and the screen, it would be about twice as the viewable height.
2. Make sure the screen hemline be away from the floor about 1.5 meter.
 

FAQ
1) Q: Are your screens suitable for 3D ?
A: Yes, they have been tested with a large range of 3D projectors with excellent results
2) Q: What size of screen should I go for ?
A: The size of screen is determined by the distance you are sitting from it but you should also make sure your projector will fill the screen from where you are able to mount it.
As a rule of thumb choose a screen just under half the width of the sitting distance.
If you are sitting around 12-14ft away use a 7ft screen.
3) Q: What is the gain?
A: The gain is the reflectivity of the screen, meaning how much light the screen reflects from the projector back at the audience. High gain screens typically 1.3 and above make the picture much brighter but reduce the contrast and viewing angle. These screens are mostly used in conference centres for presenting to large audiences.
Cinema screens have a low gain of 1-1.2, this keeps contrast levels.
4) Q: Can I ceiling mount the screen?
A: The screens can be easily wall or ceiling mounted. When ceiling mounting the screen both brackets must be fixed to the ceiling joists. When wall mounting brackets must fix to solid brick or stud work.
5) Q:How long is the warranty time for your products?
A: 12 months warranty time once you receive the goods in hands.
6) Q: Do you give any discount ?
A: The price depends on the order quantity, the more you order, the better price you can get.
7) Q: I would like to ask you if it's possible to have my logo on the product.
A: We perfectly support customized logo service basic on the bulk order quantity, even for sample with extra cost.
8) How do you ship this goods to my country ?
A) For such long package, expecial the international shipping, we usually ship it via DHL, please confirm with us your full shipping address, so we can check the exact shipment cost. If you have agency in China, we can help to deliver the goods to them.